24

2022-10


Some knowledge points about adsorption dryers, told by the accessories manufacturer of adsorption dryers

Adsorption dryer accessory manufacturers believe that the oil content of the inlet air of the adsorption dryer should be controlled below 0.01mg/m3; given that oil-free air compressors cannot currently achieve truly oil-free operation, in order to prevent the accumulation of trace amounts of oil in the adsorption bed (this accumulation is very rapid), an oil remover should be installed at the inlet of the dryer. The adsorption dryer should be used at the rated temperature and pressure. When the inlet temperature is higher than or the inlet pressure is lower than the rated value, the capacity should be corrected.

09

2022-10


Some common sense about adsorption dryers, and adsorption dryer accessories manufacturers answer your questions

The manufacturers of adsorption dryers believe that micro-heat regeneration adsorption dryers have the characteristics of simple structure, reliable and stable operation, and low gas consumption in the regeneration process. Currently, commonly used compressed air purification equipment mainly includes refrigeration dryers, non-heat regeneration adsorption dryers, and micro-heat regeneration adsorption dryers.

22

2022-09


The principle and characteristics of adsorption dryers, explained by an adsorption dryer parts manufacturer

According to the manufacturers of adsorption dryers, adsorption refers to the action of various gases, vapors, and solutes in a solution being adsorbed onto the surface of a solid or liquid substance. The substance that can adsorb is called the adsorbent, and the substance that is adsorbed is called the adsorbate. Adsorption can be divided into physical adsorption and chemical adsorption.

< 1...345...26 >
Ourinco

Get Quote


We will wholeheartedly provide you with high-quality products and services.

Submit