10-15

2021

Composition and equipment layout of the compressed air station

Compressed air pipelines shall meet the user's requirements for compressed air flow rate, pressure, and quality. Future development needs should also be considered.
Composition and equipment layout of the compressed air station

10-15

2021

Compressed air piping in the compressed air station

Compressed air pipelines should meet user requirements for compressed air flow rate, pressure, and quality. Future development needs should also be considered.
Compressed air piping in the compressed air station

10-15

2021

Civil works for compressed air station

The height of the bottom chord of the roof truss or the bottom of the beam in the compressed air station machine room should meet the requirements of equipment disassembly, lifting and ventilation, and its net height should not be less than 4m.
Civil works for compressed air station

10-15

2021

Water supply and drainage for compressed air stations

The production water supply for the compressed air station should use a single water supply, as interruption of compressed air supply would cause significant losses.
Water supply and drainage for compressed air stations

10-15

2021

Electrical, thermal, and measuring instruments and protective devices for compressed air stations

The power load level of the compressed air station should be implemented in accordance with the load level regulations of the current national standard "Design Code for Power Supply and Distribution Systems" (GB50052), based on the importance of compressed air usage by users. Except for those where interruption of compressed air would cause significant losses, it should be a Class 3 load.
Electrical, thermal, and measuring instruments and protective devices for compressed air stations

10-15

2021

Heating and ventilation of compressed air stations

The heating temperature in the compressed air station machinery room should not be lower than 15℃, and the temperature in the machinery room during non-working hours should not be lower than 5℃.
Heating and ventilation of compressed air stations

10-15

2021

Layout of compressed air station

The placement of compressed air stations in plants (mines) should be determined based on the following factors after technical and economic comparison:
Layout of compressed air station

10-15

2021

Application examples of compressed air in LCD production

The compressed air in all compressed air systems comes from the atmosphere, which contains a large amount of dust, water vapor, uncombusted hydrocarbons, and bacteria.
Application examples of compressed air in LCD production

10-15

2021

Problems caused by compressed air contamination

All compressed air in compressed air systems comes from the atmosphere, which contains large amounts of dust, water vapor, unburned hydrocarbons, and bacteria.
Problems caused by compressed air contamination

10-15

2021

Introduction to Applicable Industries for Compressed Air Drying Equipment

Where compressed air is used as a power source in industrial and mining enterprises, it should be dried where possible.
Introduction to Applicable Industries for Compressed Air Drying Equipment
< 1...789...13 >
Ourinco

Get Quote

We will wholeheartedly provide you with high-quality products and services.

Submit