Adsorption dryer accessories, solenoid valve group
The electromagnetic valve controls the opening and closing of the two intake valves and two exhaust valves of the vacuum pump.
Filter Accessories, Mechanical Automatic Drainer
Working principle: This automatic drain uses a die-cast aluminum shell assembly and contains a float drainage system. When the buoyancy of the drainage is less than the weight of the drainage float and the pressure applied by the compressed air, the drain port is closed; when the buoyancy increases, the drainage float rises, and the drain port opens; when the condensate decreases, the drain port closes again, and this cycle repeats.
Filter accessories, electric pump
A solid-state electronic timer is matched with a solenoid valve to achieve timed automatic drainage of condensate from the compressed air system. Used for draining liquid water condensed from a freeze dryer and oil-water mixtures separated by a precision filter. The drainage time and interval can be adjusted according to different needs.
Refrigerated dryer accessories, mechanical automatic drain
Float-type automatic drainers differ in structure from traditional mechanical automatic drainers and are continuous drip drainers.
Refrigerated dryer accessories pressure switch
Working principle: The diaphragm is driven by the compressor exhaust pressure to generate displacement, which pushes the controller contacts to close and open. When the exhaust pressure is low, the diaphragm moves, causing the circuit to open and the condensing fan to stop working, causing the condensing pressure to rise; when the exhaust pressure rises to a certain value, the circuit is closed and the fan starts. Although the condensing pressure fluctuates to a certain extent under this control method, it can basically ensure that the condensing pressure will not be too low when the ambient temperature is low.
Adsorption dryer accessories pneumatic valve
Working principle: The dryer controller sends an action signal, which controls the pneumatic valve's action air source through a two-position five-way solenoid valve, opening or closing the butterfly valve to achieve the dryer's air intake and exhaust process requirements.
Adsorption dryer accessories silencer
A muffler is a device that prevents the propagation of sound while allowing airflow to pass through. It is an important measure for eliminating aerodynamic noise. A muffler is a noise-reducing device installed in the exhaust system of the airflow channel of an adsorption dryer.
Adsorption dryer accessories, adsorbent
In adsorption dryers, the adsorbent is a crucial factor in ensuring the equipment's adsorption performance. Adsorbents are generally substances with a large specific surface area and high porosity. Adsorbents should meet the following conditions: 1. Strong adsorption capacity and large specific surface area; 2. No chemical reaction with the adsorbate and other contacting media; 3. Good mechanical and thermal strength; 4. Easy regeneration and resistance to degradation; 5. Mass production and low cost.
Adsorption dryer accessories controller
The heatless regenerative adsorption dryer controller is a dedicated controller developed using PIC single-chip microcomputer technology. It automatically controls the adsorption and regeneration operation of the dryer's A and B towers according to the set parameters, clearly displaying the current operating status via digital tubes and indicator lights. It features I/O remote control.
The micro-heat regenerative adsorption dryer controller is one of a series of cost-effective control products designed for adsorption micro-heat regenerative dryers. In addition to having field-programmable time control, it also allows temperature setting. Temperature control uses on-off control and can be connected to appropriate AC contactors and protective circuits to drive electric heaters of various types and power ratings.
The micro-heat regenerative adsorption dryer controller is one of a series of cost-effective control products designed for adsorption micro-heat regenerative dryers. In addition to having field-programmable time control, it also allows temperature setting. Temperature control uses on-off control and can be connected to appropriate AC contactors and protective circuits to drive electric heaters of various types and power ratings.