+
  • 7-多米尼克Domnick-Hunter替代滤芯-x.jpg
  • 7-多米尼克Domnick-Hunter替代滤芯-xx.jpg
  • 7-多米尼克Domnick-Hunter替代滤芯-xxx.jpg

Domnick Hunter replacement filter element (old model)


Yinko provides competitive replacement filter elements for DOMNICK.HUNTER (Dominick Hunter) filter cartridges | DH filter cartridges. Precision filter cartridges are made using high-quality European filtration materials, stainless steel (iron) frames, and nylon plastic end caps (most small domestic factories use domestic filtration materials, galvanized steel frames, and ABS engineering plastics, resulting in poor filtration, easy rusting, and breakage). They feature high filtration efficiency, corrosion resistance, high strength, low airflow resistance, and a long service life.

Product Information


Enco provides competitive replacement filter elements for DOMNICK HUNTER Domnick Hunter filters | DH filters. Precision filter elements are made using high-quality European filter materials, stainless steel (iron) frames, and nylon plastic end caps (most small domestic factories use domestic filter materials, galvanized steel frames, and ABS engineering plastics, resulting in poor filtration efficiency, easy rust, and breakage). They feature high filtration efficiency, corrosion resistance, high strength, low airflow resistance, and long service life.

DOMNICK HUNTER Domnick Hunter filter elements come in old and new models, mainly differing in the type of interface. Older filter elements have a stepped flat mouth, while newer filter elements have an elbow interface.

PF Grade Primary pre-filtration, removing dust particles larger than 25 microns, including water mist and oil mist.
AO Grade High-efficiency general protection, removing dust particles larger than 1 micron, as well as water mist and oil mist. Maximum oil mist content: 0.5mg/m³ (at 21℃) / 0.5ppm (w) (at 70℉)
AA Grade High-efficiency oil removal filtration (requires an AO-grade filter beforehand), removing dust particles larger than 0.01 microns, as well as water mist and oil mist. Maximum oil mist content: 0.01mg/m³ (at 21℃) / 0.01ppm (w) (at 70℉)
AX Grade Ultra-high-efficiency filtration (requires an AO-grade filter beforehand), removing dust particles larger than 0.01 microns, as well as water mist and oil mist. Maximum oil mist content: 0.001mg/m³ (at 21℃) / 0.001ppm (w) (at 70℉)
AR Grade General dust removal filtration, removing dust particles larger than 1 micron.
AAR Grade High-efficiency dust removal filtration, removing dust particles larger than 0.01 microns.
ACS Grade Removes oil vapor and odors (requires an AA-grade filter beforehand). Maximum residual oil vapor: 0.003mg/m³ (at 21℃) / 0.003ppm (w) (at 70℉).

Filter Grade Model

Filtration Accuracy (μm)

Residual Oil Content (ppm)

AO Grade (Coalescing)

1

0.5

AA Grade (Coalescing)

0.01

0.01

ACS Grade (Oil Vapor Removal)

N/A

0.003

OVR Grade (Oil Vapor Removal)

N/A

0.003

AR Grade (Solid Dry Particles)

1

N/A

AAR Grade (Solid Dry Particles)

0.01

N/A


Flow Rate
Nm³/min

Filter Grade Model

ELS Pipeline Filter Element

EMS Oil Mist Separator Element

EKS Deodorizing Filter Element

0.35

ELS-75

EMS-75

EKS-75

1.2

ELS-150

EMS-150

EKS-150

1.8

ELS-200

EMS-200

EKS-200

2.4

ELS-250

EMS-250

EKS-250

3.9

ELS-400

EMS-400

EKS-400

6.6

ELS-700

EMS-700

EKS-700

10.6

ELS-1000

EMS-1000

EKS-1000

13.8

ELS-1300

EMS-1300

EKS-1300

20.0

ELS-2000

EMS-2000

EKS-2000

 Domnick Hunter Replacement Filter Elements

Keywords:

Replacement filter

filter cartridge

Ourinco

Get Quote


We will wholeheartedly provide you with high-quality products and services.

Submit