Enco provides competitive replacement filter elements for HIROSS filters. These precision filter elements are made with high-quality European filter materials, stainless steel (iron) frames, and nylon plastic end caps (most small domestic factories use domestic filter materials, galvanized sheet frames, and ABS engineering plastics, resulting in poor filtration, easy rusting and breakage). They feature high filtration efficiency, corrosion resistance, high strength, low airflow resistance, and a long service life.
Q Level Removes dust particles larger than 5 microns, as well as water mist and oil mist. Maximum oil mist content: 5mg/m³ (at 21℃) / 5ppm(w) (at 70℉)
P Level Removes dust particles larger than 1 micron, as well as water mist and oil mist. Maximum oil mist content: 1mg/m³ (at 21℃) / 1ppm(w) (at 70℉)
S Level Removes dust particles larger than 0.01 microns, as well as water mist and oil mist. Maximum oil mist content: 0.01mg/m³ (at 21℃) / 0.01ppm(w) (at 70℉)
C Level Removes dust particles larger than 0.01 microns, as well as water mist and oil mist, and adsorbs oil vapor and odors. Maximum oil mist content: 0.003mg/m³ (at 21℃) / 0.003ppm(w) (at 70℉).
| Filter Element Grade and Model |
Filtration Accuracy (μm) |
Residual Oil Content (ppm) |
| Q |
5 |
5 |
| P |
1 |
1 |
| S |
0.01 |
0.01 |
| C |
0.01 |
0.003 |
| Flow Rate |
Filter Element Grade and Model |
|||
| Q Level |
P Level |
S Level |
C Level |
|
| 0.4 |
004Q |
004P |
004S |
004C |
| 0.7 |
007Q |
007P |
007S |
007C |
| 0.9 |
009Q |
009P |
009S |
009C |
| 1.5 |
015Q |
015P |
015S |
015C |
| 2.4 |
024Q |
024P |
024S |
024C |
| 3.5 |
035Q |
035P |
035S |
035C |
| 6 |
060Q |
060P |
060S |
060C |
| 9 |
090Q |
090P |
090S |
090C |
| 12 |
120Q |
120P |
120S |
120C |
| 15 |
150Q |
150P |
150S |
150C |
| 24 |
240Q |
240P |
240S |
240C |
