Compression Heat Adsorption Dryer

Category:

Adsorption Dryer

The ADY series compressed heat (waste heat) dryer uses the waste heat from the oil-free air compressor to heat and regenerate the adsorbent, making full use of the waste heat in the compressed air system. Without using a heating device, it can still achieve the effect of a heating-type dryer, fully demonstrating its energy-saving and high-efficiency characteristics. The finished gas dew point can reach -40°C.

+86 13810858528

sales@ourinco.com

Product Quotation

Download

Product Information

Select high-quality, high-efficiency desiccants for stable dew point

PDP-40℃ Activated Alumina (Standard)
PDP-70℃ Activated Alumina + Silica Gel + Molecular Sieve (OPTION)

Advanced energy management to reduce operating costs

Temperature-controlled regeneration and purging
Dew point control
Optimized flow nozzle

Large-size tower body and flow control, minimizing desiccant wear and tear

Economical and reasonable use of regeneration gas while ensuring air dryness
High-reliability design for stable operation

Stainless steel valve plate
Galvanized pipes
Instrument air source with filter and pressure regulator
Uses high-quality blowers
Equipped with high-temperature protection device and low-power density electric heater for long lifespan and low risk
Purelogic control system, providing superior control and monitoring

Applicable Environment

Tools and instruments
Control system
Spraying tools
Successful injection
Auto shop
Tire pressure

Product features

The ADY series compressed heat (waste heat) dryer uses the waste heat of the oil-free air compressor to heat and regenerate the adsorbent, making full use of the waste heat in the compressed air system. Even without a heating device, it can achieve the same effect as a heating-type dryer, fully demonstrating its energy-efficient characteristics. The finished air dew point can reach -40℃.

It adopts an independent PLC controller, which is more stable and reliable than a single-chip microcomputer. The control valve uses a high-quality butterfly valve, ensuring more than 1 million trouble-free switching cycles.

Advanced distributor design enables uniform contact between compressed air and the adsorbent, thoroughly eliminating channeling. Unique layered technology:

The layered technology developed by our company allows the air to first undergo preliminary drying with activated alumina, reducing the water content before undergoing deep drying with molecular sieves to achieve low dew point air quality.

Operating conditions and technical indicators

Power: 220V/50Hz

Working Pressure: 0.6~1.0Mpa

Pressure drop: ≤0.04MPa

Inlet temperature: 110℃-140℃

Cooling water inlet pressure: 0.2-0.4MPa

Cooling water inlet temperature: ≤32℃

Dew point: -12.2℃~-40℃

Purge air: 1%

ADY Series Compressed Heat (Waste Heat) Dryer Model Parameters

Model	Flow Rate m³/min	Cooling Water Circulation Volume	Air Interface Pipe Diameter	Dimensions mm			Weight kg
Model	Flow Rate m³/min	Cooling Water Circulation Volume	Air Interface Pipe Diameter	L	W	H	Weight kg
ADY0400	45	24	DN100	2500	1600	2500	2500
ADY0500	55	32	DN125	2600	2200	2900	2870
ADY0600	65	38	DN125	2600	2200	2900	3350
ADY0800	85	50	DN150	3100	2700	3200	4500
ADY1000	100	60	DN150	4500	2900	3200	5500
ADY1200	120	70	DN150	4500	2900	3200	8500
ADY1600	150	96	DN200	4700	2900	3200	9000
ADY2000	200	120	DN200	5000	2900	3200	13000
ADY2500	250	150	DN250	5300	4300	3300	15000
ADY3000	300	180	DN300	6500	5000	3200	18000
ADY3500	350	210	DN300	7000	5500	3200	22000
ADY4000	400	240	DN300	8000	6000	3200	25000
ADY5000	450	270	DN400	8000	6000	3200	28000